Suspension & Engine | Mx Factory Parts Ltd

top of page

SUSPENSION & ENGINE

Works Connection’s Air Fork EZ Fill is a set of fittings that function as an extension of the Schrader valve on your air forks. With these fittings, your air valve protrudes for easy adjustments and can be tucked out of harm’s way thanks to the pivoting design. The EZ Fill system is compatible with OEM and aftermarket bar mounts/positions and eliminates the need to remove the front number plate. No adapters or special pump hoses are required, and modifications are not needed. Available to purchase at Mx Factory Parts Ltd, UK.

WC Air Fork Ez Fill

Works Connection’s CRF EZ Oil Drain System is a simple tool designed to prevent messy spills when changing the oil on the CRF450R and RX. The tool consists of a threaded fitting that can be screwed into the oil drain hole on the underside of the CRF’s cases. To use the tool, lay the CRF over with the throttle end of the handlebars on a bike stand, remove the oil drain plug, thread the oil drain system into the oil drain hole, and stand the CRF back up. With the drain pan positioned below the engine, release the tension on the drain clip to allow engine oil to drain. Available to purchase at Mx Factory Parts Ltd, UK.

WC CRF EZ Oil Drain System

Works Connection’s Fork Adjusters for the Yamaha 2024 YZ250F, 2023-2024 YZ450F are machined from aircraft-grade aluminum and replace the stock plastic adjusters. The company uses a four-flute design and made them slightly taller to allow for easier adjustments with a more solid detent. You can purchase the Fork Adjusters from Mx Factory Parts Ltd, UK.

WC Fork Adjusters (YZF)

Works Connection’s Fork Bleeder Valves are a popular option for dirt bike riders. The EZ push-button operation eliminates harsh, built-up air pressure instantly, allowing your suspension to operate as designed. The Fork Bleeder Valves are compatible with Kayaba and Showa upside-down forks equipped with stock bleeder screws and can be installed in minutes. You can purchase the Fork Bleeder Valves from Mx Factory Parts Ltd, UK.

WC Fork Bleeders (Shorty)

WC Fuel Mixture Screw

Works Connection’s No Air Loss Adaptor is a tool designed to ensure that the air pressure you set is the air pressure you get. This tool is especially useful when accessing the lower air chamber at the bottom of your fork and eliminates the need to bleed the air out of the fork after adjusting the pressure. The No Air Loss Adaptor is compatible with all Schrader-type pumps and works with air forks and air shocks on motorcycles and mountain bikes You can purchase the No air loss adaptors from Mx Factory Parts Ltd, UK.

WC No Air Loss Adaptor

WC Shock Pump

Works Connection offers a Tach/Hour Meter that is designed to track the running time of your dirt bike’s engine and help you keep up with maintenance schedules. Features a resettable maintenance timer, five mode display screens, and a clock that can display 12 or 24-hour time. The Tach/Hour Meter is compatible with fuel-injected/carbureted 2-strokes/4-strokes from 1 to 8 cylinders and can measure up to 19999 RPM and track total hours up to 99999. The Tach/Hour Meter can be mounted on any flat surface with the included heavy-duty, die-cut Peel-n-Stick or with an optional Mount Bracket that is available for bolt-on mounting (sold separately). You can purchase the Tach/Hour Meter & brackets from Mx Factory Parts Ltd, UK.

WC Tach/Hour Meter Clocks & Brackets

VForce reed valves are high-performance reed valves for motocross and enduro machines. They are designed to increase engine power and throttle response by increasing the efficiency over a conventional reed valve design. The VForce system also uses a completely screw-free design, which prevents a worst-case scenario of one loosening and causing catastrophic engine damage. VForce reed valves are manufactured by Moto Tassinari and can be purchased from Mx Factory Parts Ltd, UK.

Vforce Reed Valves & Accessories

bottom of page